{"product_id":"ember-red-light-therapy-panel-for-sauna","title":"Ember Red Light Therapy Panel for Sauna","description":"\u003cp\u003eThe \u003cstrong\u003eEmber Red Light Therapy Panel for Sauna\u003c\/strong\u003e is purpose-built to run inside a hot, humid sauna. With a sealed IP65-rated housing, an aluminum body, a 4-in-1 lens over every LED, and a 194°F max operating temperature, it's engineered to survive the conditions that ruin a standard red light panel — and bring full-spectrum red and near-infrared therapy directly into your sauna sessions.\u003c\/p\u003e\n\u003cp\u003e384 medical-grade LEDs, four clinically-relevant wavelengths, and 175 mW\/cm² peak irradiance in a compact footprint designed for personal saunas, corner installs, and dedicated wellness rooms.\u003c\/p\u003e\n\u003ch2\u003eWhy a Sauna-Safe Panel Is Different\u003c\/h2\u003e\n\u003cp\u003eStandard red light therapy panels are not built for sauna environments. Heat, steam, and humidity destroy non-sealed electronics, melt plastic housings, and corrode connections. Most home panels are rated for ambient room temperatures only — running them in a sauna voids the warranty and risks failure.\u003c\/p\u003e\n\u003cp\u003eThe Ember is engineered for sauna use from the ground up:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIP65 sealed housing\u003c\/strong\u003e — dust-tight and protected against water jets, the industry-standard rating for wet-environment electronics\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAluminum housing\u003c\/strong\u003e — no plastic to warp or off-gas in heat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIP65-rated internal driver\u003c\/strong\u003e — sealed power supply inside the panel, not a separate brick that can't take the heat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e194°F (90°C) maximum operating temperature\u003c\/strong\u003e — covers the full range of traditional and infrared saunas\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInternal cooling fan\u003c\/strong\u003e — actively dissipates heat to keep LEDs and driver in their operating range\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLED count:\u003c\/strong\u003e 384 LEDs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWavelengths:\u003c\/strong\u003e 630 nm · 660 nm · 810 nm · 850 nm (red + near-infrared)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIrradiance:\u003c\/strong\u003e 175 mW\/cm² max — 111 mW\/cm² at 6\", 90 at 12\", 76 at 18\", 59 at 24\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower consumption:\u003c\/strong\u003e 180W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHousing:\u003c\/strong\u003e Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIP rating:\u003c\/strong\u003e IP65 (dust-tight, protected against water jets)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax operating temperature:\u003c\/strong\u003e 194°F \/ 90°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCooling:\u003c\/strong\u003e 1 internal fan\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDriver:\u003c\/strong\u003e IP65-rated, internal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e AC 100–240V (works worldwide)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEMF:\u003c\/strong\u003e 0.0 μT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlicker:\u003c\/strong\u003e None\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eControls:\u003c\/strong\u003e Touch keys with separate wavelength control\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTimer:\u003c\/strong\u003e 1–20 minutes, 1-minute intervals\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePulse modes:\u003c\/strong\u003e 10 Hz and 40 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrightness:\u003c\/strong\u003e 0–100% in 5% increments\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eIndependent Wavelength Control\u003c\/h2\u003e\n\u003cp\u003eUnlike single-button panels, the Ember gives you separate controls for each of the four wavelengths. Run red only (630\/660 nm) for skin-focused sessions, near-infrared only (810\/850 nm) for deeper-tissue exposure, or all four together for full-spectrum coverage. Combine with the brightness, timer, and pulse settings to tailor every session.\u003c\/p\u003e\n\u003ch2\u003eWhere It Fits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePersonal infrared and traditional saunas\u003c\/strong\u003e — hang it, wall-mount it, or set it on the floor stand inside the cabin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWellness rooms and recovery suites\u003c\/strong\u003e — pairs with sauna sessions for combined heat + light protocols\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSmaller spaces\u003c\/strong\u003e where the larger Blaze won't fit but full-spectrum therapy is still wanted\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eThree Ways to Mount It\u003c\/h2\u003e\n\u003cp\u003eEvery panel ships with everything needed to hang it or wall-mount it. The floor stand is the only mounting option sold separately.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHang it\u003c\/strong\u003e — the included hanging cable and pulley suspend the panel from the sauna ceiling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWall-mount it\u003c\/strong\u003e — the included mounting hardware fixes the panel to a sauna wall for a permanent install.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStand it on the floor\u003c\/strong\u003e — the \u003ca href=\"\/products\/sauna-series-floor-stand\"\u003eSauna Series Floor Stand\u003c\/a\u003e is a rolling iron base with two upright brackets that hold the panel upright. No tools, no drilling, and locking caster wheels so you can roll it into position, lock it in place, and move it aside afterward. $99, sold separately.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eHow to Use\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eMount the panel securely inside your sauna using the included hanging kit, or set it on the \u003ca href=\"\/products\/sauna-series-floor-stand\"\u003eSauna Series Floor Stand\u003c\/a\u003e for a free-standing setup with no drilling (sold separately).\u003c\/li\u003e\n\u003cli\u003ePlug into a properly rated outlet outside the sauna or into a sauna-rated electrical run.\u003c\/li\u003e\n\u003cli\u003ePower on, set the timer (1–20 minutes), select wavelengths, adjust brightness, and optionally engage pulse mode.\u003c\/li\u003e\n\u003cli\u003eRun your sauna session as normal. The panel operates safely up to 194°F.\u003c\/li\u003e\n\u003cli\u003eLet the panel cool with the sauna before powering off the supply.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhat makes this different from a regular Hooga panel?\u003c\/strong\u003e\u003cbr\u003eStandard Hooga panels (HG, PRO, ULTRA series) are designed for ambient room temperatures and are not rated for sauna use. The Ember has a sealed IP65 housing, an aluminum body, and a 194°F max operating temperature — purpose-built to survive heat and humidity that would damage a standard panel.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill it work in a traditional sauna (high heat) and an infrared sauna?\u003c\/strong\u003e\u003cbr\u003eYes. The 194°F (90°C) operating ceiling covers the full range of both traditional and infrared sauna temperatures.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEmber vs. Blaze — how do I choose?\u003c\/strong\u003e\u003cbr\u003eThe Ember has 384 LEDs and a 180W draw, designed for personal saunas and tighter installs. The Blaze has 768 LEDs and a 340W draw for larger saunas, wider beam coverage, and full-body sessions. Both run the same four wavelengths at similar intensity — the Ember peaks at 175 mW\/cm² and the Blaze at 185 — so the real difference is how much of you the light covers, not how strong it is.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it include a stand or mount?\u003c\/strong\u003e\u003cbr\u003eEvery panel ships with mounting hardware, a hanging cable, and a hanging pulley, so you can hang it or wall-mount it in your sauna out of the box. If you would rather not drill into a sauna wall, the \u003ca href=\"\/products\/sauna-series-floor-stand\"\u003eSauna Series Floor Stand\u003c\/a\u003e is a rolling floor base that holds the panel upright with no tools ($99, sold separately).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I leave it inside the sauna full-time?\u003c\/strong\u003e\u003cbr\u003eYes — the IP65 rating and 90°C operating spec are designed for permanent sauna installation. Be sure power connections are routed safely per local electrical code.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the warranty?\u003c\/strong\u003e\u003cbr\u003eHooga panels carry a 3-year warranty. Contact us for sauna-specific installation guidance.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0075\/2923\/4522\/files\/Hooga-Sauna-Series-User-Manual-2026.pdf?v=1787603205\" target=\"_blank\" rel=\"noopener\"\u003eDownload the Sauna Series user manual (PDF)\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThis is a wellness device, not an FDA-cleared medical device. It is not intended to diagnose, treat, cure, or prevent any disease. Consult a healthcare provider if you have a medical condition or are pregnant before combining red light therapy with sauna use.\u003c\/em\u003e\u003c\/p\u003e","brand":"Hooga","offers":[{"title":"Default Title","offer_id":56197656084785,"sku":"hooga_ember","price":800.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0898\/4264\/7345\/files\/HoogaEmberMainProductImage1.png?v=1788977426","url":"https:\/\/saunaheatersupply.com\/products\/ember-red-light-therapy-panel-for-sauna","provider":"Sauna Heater Supply","version":"1.0","type":"link"}